Audi A4 B9 Coding List Site

[17] → Adaptation → "Staging" → Set to Active 2. Lap Timer / Oil Temperature Display Module: 17 – Instrument Cluster Adaptation: [17] → Adaptation → "Display depiction" → "Lap timer" → Active 3. Disable Start-Stop (Memory or Permanent) Module: 08 – Air Conditioning / Heater Electronics Adaptation: [08] → Adaptation → "Start-stop function" → Change to "Not active" Or for memory: IDE04159 – Start/Stop operating voltage limit → Increase to 12.1V (prevents activation) 4. Video in Motion (VIM) Module: 5F – Information Control Unit Adaptation: [5F] → Adaptation → "Speed lock" → "Speed lock at standstill" → Not active Also need to adjust region coding sometimes: Byte 24 → Bit 4 uncheck 5. Enable Ambient Lighting Menu (if not present) Module: 09 – Central Electrics Adaptation: [09] → Adaptation → "Ambient lighting" → Set to "Installed" [09] → Adaptation → "Interior light, light configuration" → Configure RGB channels if available 6. Rear DRL (Daytime Running Lights) Module: 09 – Central Electrics Coding: [09] → Security Access (31347) → Adaptation → "Leuchte26" → "Light function D" → Set to "Daytime running lights" 7. Mirror Dip in Reverse (Passenger Side) Module: 52 – Door Electrics Passenger Coding: [52] → Long Coding → Byte 4 → Bit 2 Enable (Mirror lowering)

Here’s a comprehensive . This covers common VCDS (Vag-Com) , OBDeleven , or VCP tweaks. ⚠️ Disclaimer: Coding varies by model year, module software, and factory equipment. Always save original coding before changes. Use at your own risk. 1. Needle Sweep (Gauge Celebration) Module: 17 – Instrument Cluster Coding: [17] → Long Coding → Byte 1 → Bit 0 Enable “Celebration active” audi a4 b9 coding list

Alternative via adaptation: [17] → Adaptation → "Seat belt warning" → Seat belt warning: Driver → Not active Module: 09 – Central Electrics Adaptation: [09] → Adaptation → "Comfort operation" → "Comfort closing" → Active [09] → "Comfort opening" → Active [09] → "Comfort operation: remote control" → Active 11. Emergency Brake Flashing (Brake light flash) Module: 09 – Central Electrics Adaptation: [09] → Adaptation → "Emergency brake flash" → "Light function" → Brake light [09] → "Emergency brake flash" → "Light function" → Brake light (with flash pattern) 12. Disable Headlight Washers (if equipped) Module: 09 – Central Electrics Adaptation: [09] → Adaptation → "Headlight washer system" → Set to "Not active" 13. Acoustic Lock/Unlock Confirmation Module: 46 – Central Comfort Adaptation: [46] → Adaptation → "Locking beep" → "Beep at locking" → Active [46] → "Beep at unlocking" → Active [17] → Adaptation → "Staging" → Set to Active 2

09 – Central Electrics Adaptation: [09] → "Spiegelverstellung" → "Rueckwaertsfahren" → "Aktiv" Note: Mirror adjust switch must be in "Passenger" position. 8. Cornering Lights via Fog Lights Module: 09 – Central Electrics Adaptation: [09] → Adaptation → "Static cornering light" → "Active" Also adjust: Abbiegelicht Geschwindigkeitsschwelle (speed thresholds) 9. Disable Seatbelt Warning (Driver & Passenger) Module: 17 – Instrument Cluster Coding: [17] → Long Coding → Byte 0 → Bit 2-4 → Disable seatbelt warning Video in Motion (VIM) Module: 5F – Information