Df158 Renault [DIRECT]

Abstract The Renault DF158 is a landmark 2.4-liter naturally aspirated V8 engine that competed in Formula 1 during the 2007 and 2008 seasons. Developed by Renault Sport under the leadership of Rob White, the DF158 represented a strategic shift away from the wide-angle V10s of the previous decade. This paper examines the engine’s technical architecture, its deployment in the Renault R27 and R28 chassis, its performance metrics, and its role in the intense 2007–2008 championship battles, including Fernando Alonso’s two race wins in 2008. The DF158 serves as a case study in optimizing for regulated engine homologation and drivability over sheer peak power. 1. Introduction Following the FIA’s 2006 mandate to replace the 3.0-liter V10 with a 2.4-liter V8, Renault—a pioneer of the V10 era—had to redesign its powertrain philosophy. The RS26 (2006) was a transitional engine. For 2007, Renault introduced the DF158 , a clean-sheet design aimed at recovering lost power while maintaining reliability and driveability. Unlike Ferrari’s or Mercedes’ units, the DF158 prioritized mid-range torque and fuel efficiency, reflecting Renault’s Total fuel partnership. 2. Technical Specifications | Parameter | Value | |-----------|-------| | Configuration | 90° V8 | | Displacement | 2,400 cc (146 cu in) | | Bore / Stroke | 98 mm / 39.8 mm (undersquare) | | Max Power | ~740–760 bhp @ 19,000 rpm (2007) | | Max Torque | ~285 Nm @ 17,500 rpm | | Valvetrain | Pneumatic valve return (Renault proprietary) | | Fuel system | Bosch MS 24.1 direct injection | | Weight | 95 kg (minimum mandated) | | Spark plugs | Champion | | Lubricant | Elf (Total) |