Chip Driver — Gx

gx_i2c: bus stuck → Implement i2c recovery (toggle SCL 9 times manually).

VPU_REG_DEC_CTRL (0xF100_0000) VPU_REG_STATUS (0xF100_0004) // bit 0 = busy VPU_REG_DATA (0xF100_0008) // firmware mailbox Driver requests gx_vpu_fw.bin from /lib/firmware . Missing firmware → VPU fails to start. gx chip driver

can occur if status register is not cleared exactly once. 6. Debugging GX Drivers Without Vendor Support 6.1 Tools & Methods | Tool | Purpose | |------|---------| | devmem2 | Read/write raw registers (e.g., devmem2 0xF0000020 ) | | strace | Trace ioctl calls to DRM/V4L2 | | dmesg -w | Watch driver prints (enable with DYNAMIC_DEBUG ) | | cat /sys/kernel/debug/dri/*/state | DRM state | | gdb + KGDB | Kernel debugging over serial | 6.2 Common Errors & Fixes Error: gx_vpu: timeout waiting for interrupt → Check VPU clock (is it enabled?), firmware loaded? Try clk_enable(vpu_clk) . gx_i2c: bus stuck → Implement i2c recovery (toggle