Heidenhain Error Codes Apr 2026

He pressed CYCLE START anyway.

Then came the one no machinist wants to see:

He leaned against the cold sheet metal. The Heidenhain didn’t speak in words. It spoke in pulses, phases, and Lissajous figures. And tonight, its silence screamed through a list of red-lettered codes.

He grabbed a notepad. Under , he wrote one line: heidenhain error codes

“That’s a crash waiting to happen,” he whispered.

The Z-axis thought it was at +12.000 mm. The dial indicator said -0.400.

The servo groaned. The axis lurched. Then: He pressed CYCLE START anyway

Then the master code appeared — the one that means “stop guessing, call the service engineer”:

That’s the machine going blind. The glass scale — etched with micron-perfect graduations — had fogged, or cracked, or simply given up.

“The axis tried to move where the glass didn’t see.” It spoke in pulses, phases, and Lissajous figures

The TNC 640 screen flickered — not the warm hum of a healthy contour, but a cold, amber glow.

Here’s a dramatic, technical piece inspired by — imagining them as cryptic warnings from a precision CNC or encoder system. Title: Ghost in the Glass Scale

Then he called the service tech. The machine was possessed — not by demons, but by dust on a linear scale and a dying 5-volt supply. Would you like this turned into a short troubleshooting flowchart or a fictional machine log (timestamped error entries)?

No, I didn’t press stop.

@F1594194575391 said:
i am getting Error in MSM tool ( Param Preload ) device not match the image plz help me i am stuck at bootloader and device state is locked plz help me

Are you trying to use the OnePlus 6T MSMDownloadTool on a OnePlus 7 series phone... as per your post, here... https://community.oneplus.com/thread?id=1159996

Start the MSM tool with administrative privileges. Otherwise, the tool can't access the device and flash the image.

@Españoleto said:
Higives you some error messagedo not open msntool until the end and with administrator rights

Extract file first

Ciao a tutti, ho un oneplus 8 pro che all'avvio va in crashdump anche provando da recovery. Avevo appena aggiornato ad android 11 e provato con bootloader sbloccato a flash della twrp. Ho provato ad usare msmdowlnloadtool seguendo questa guida : https://forum.xda-developers.com/on...-unbrick-tool-to-restore-device-t4084953/amp/ scaricando questa versione OOS 10.5.11, msmdowbloadtool carica e mi restituisce l'errore : Param preload falied, come posso risolvere?

@R.Peter said:
Start the MSM tool with administrative privileges. Otherwise, the tool can't access the device and flash the image.

Thank you so much bro

i am getting Error in MSM tool ( Param Preload ) device not match the image plz help me i am stuck at bootloader and device state is locked plz help me

@H1550749123362 said:
HiPlease help! I have downloaded everything in this link:https://forum.xda-developers.com/one...-guac-t3934691It contains "guacamole_21_O.07_190512_repack" and "L2 drivers"I have followed the mega unbrick guide:https://forum.xda-developers.com/one...icked-t3934659So far ...

Were you able to fix it? I ran into the same problem. Need every help I can get.

@Polloux said:
i have the same problem triying to install twrp in Android 10, tried in different PC and nothing, the param stuck remain, luckly my brick was in the bootloader. I do a flash-all-partitions.bat in a stock fastboot rom and problem solved. I hope this can be used in your case.

Hi, I ran into a similar problem. Can you please tell me how you did this? I'll even pay you.

I was having that same issue on a Windows 7 PC with everything loaded properly, worked on the 1st try with Windows 10

i have the same problem triying to install twrp in Android 10, tried in different PC and nothing, the param stuck remain, luckly my brick was in the bootloader. I do a flash-all-partitions.bat in a stock fastboot rom and problem solved. I hope this can be used in your case.

@H1550749123362 said:
HiPlease help! I have downloaded everything in this link:It keeps Param Preloading..Please, any help will be really much appreciated!

Hi
gives you some error message
do not open msntool until the end and with administrator rights

@H1550749123362 said:
HiPlease help! I have downloaded everything in this link:https://forum.xda-developers.com/one...-guac-t3934691It contains "guacamole_21_O.07_190512_repack" and "L2 drivers"I have followed the mega unbrick guide:https://forum.xda-developers.com/one...icked-t3934659So far ...

I think the people who are able to help will need to know which OP device you are running. I'm not sure. Just assuming.