Tableau Correspondance Carburateur Walbro -

Float carburetors require a gravity fuel feed or fuel pump; diaphragm carbs can pull fuel from below tank level. 5. OEM to Walbro Correspondence Table Many OEMs stamp their own numbers on Walbro carbs. Use this to find the actual Walbro model:

| OEM Brand | OEM Part Number | Corresponding Walbro Model | |-----------|----------------|-----------------------------| | Stihl | 1121 120 0600 | WT-215 | | Stihl | 1128 120 0601 | WYL-1 | | Husqvarna | 503 90 87-02 | HDA-199 | | Husqvarna | 501 82 93-01 | WT-112 | | Echo | 14510042330 | WYJ-2 | | Echo | 14510042331 | WT-118 | | McCulloch | 953-020-001 | WA-76 | | Homelite | 694208 | WT-99 | tableau correspondance carburateur walbro

| Kit Number | Fits Families | Notes | |------------|---------------|-------| | K10-WAT | WT, WA, WYJ, WYL | Includes pump diaphragm, gasket, metering diaphragm | | K20-WAT | HDA, HDC, HS | Thicker pump diaphragm for higher pulse pressure | | D10-WB | WB series only | Smaller diameter | Float carburetors require a gravity fuel feed or

If the bolt spacing is 32mm center-to-center and bore is 14.5mm, any WT with matching throttle linkage cam will work. You may need to swap the metering lever height (1.3mm below carb body for most). 4. Correspondence Between Diaphragm and Float Type | Diaphragm Model | Float Model Equivalent | Conversion Kit Needed | |----------------|------------------------|------------------------| | WT-215 | WB-3A | Adapter block + longer bolts | | WA-167 | WB-27 | Pulse hose relocation kit | | HDA-199 | HS-262 | None (same body, different bowl) | Use this to find the actual Walbro model: