Easycwmp Tutorial Today

# In /etc/config/easycwmp config connection_request option interface 'eth0' option port '7548' option path '/' Start the Backend Daemon (easycwmpd) sudo easycwmpd -f -d # foreground + debug mode Or run as a service:

Package the new .ipk or .deb as a firmware upgrade, or use the Download RPC with FileType = 3 Vendor Configuration File and run a script. easycwmp tutorial

config acs 'general' option acs_url 'https://your-acs-server.com:7547/' option periodic_interval '3600' # seconds option periodic_enable '1' option retry_interval '30' # seconds option connection_request_username 'admin' option connection_request_password 'secret' option ssl_verify_host '0' # disable for self-signed certs option ssl_verify_path '0' config device 'device' option manufacturer 'MyCompany' option manufacturer_oui '001234' option product_class 'MyRouterV1' option serial_number 'SN1234567890' option hardware_version '1.0' option software_version '1.0.0' # Force an Inform immediately easycwmp inform easycwmp

config local 'local' option interface 'eth0' # network interface option port '7548' # for connection requests uuidgen > /etc/easycwmp/serial Configure ACS Connection Request Handling EasyCWMp must listen for incoming requests from the ACS. This is typically done via iptables or by binding to a specific port. Step 1: Install GenieACS # Using Docker (easiest)

# Force an Inform immediately easycwmp inform easycwmp download Reboot the device (if allowed by ACS) easycwmp reboot Factory reset easycwmp factoryreset Show current parameters easycwmp get parameter name Device.DeviceInfo.SerialNumber 6. Testing with GenieACS (Local ACS) To fully test EasyCWMp, you need an ACS. Let’s set up GenieACS quickly. Step 1: Install GenieACS # Using Docker (easiest) docker run -d --name genieacs -p 7547:7547 -p 3000:3000 genieacs/genieacs Step 2: Access GenieACS UI Open http://localhost:3000 – default credentials: admin / admin Step 3: Configure EasyCWMp to Use GenieACS Edit /etc/config/easycwmp :